Terex Finlay J1160

Terex Finlay J1160 specifications

Terex Finlay J-1160 Jawcrusher on tracks, build 2020, # 4415hrs comes with a Magnet and will have new swing jaw fitted, side belt, and serviced ready for work. Contact us if you need more information about this Terex Finlay J-1160 Jawcrusher on tracks!

Weight: # 35.000kg

The Finlay® J-1160 primary mobile jaw crusher was designed with the customer and operator in mind. The new model features increased under jaw clearance and all round preventative maintenance and serviceability access.

The heart beat of the machine is the renowned and aggressive Terex 1000 x 600mm (40” x 24”) jaw crusher with a proven pedigree in recycling, demolition and aggregate production applications. The hydrostatic drive gives the operator the flexibility of variable crushing speed and the ability to run the chamber in reverse in certain applications.

Designed to maximize fuel efficiency and deliver one of the lowest cost per ton in the market place the machine is the ideal solution for small to medium sized operators.

HOPPER/FEEDER

Hopper capacity: 5m³ (6.5yd³)

Feed height with standard hopper: 3.4m (11’ 2”)

Feed height with standard hopper and extensions: 3.7m (12’ 1”)

Vibrating grizzly feeder (VGF)

VGF Speed range: variable, 450-850 rpm

Hopper extensions hydraulic folding and hydraulic locking

BY-PASS CONVEYOR

Belt Width: 650mm (26”)

Working Angle: 22°

Hydraulically folds for transport

Standard Discharge Height: 2.1m (6’ 10”)

Stockpile capacity: 12m3 (15.7yds3) @ 40°

JAW CRUSHER

Terex chamber single toggle jaw crusher

Inlet width: 1000mm (40”)

Inlet gape: 600mm (24”)

Under jaw clearance: 540mm nominal

Drive arrangement: Hydrostatic with full reverse crush capability

Maximum Closed Side Settings (CSS): 145mm (5 45/64”)

Minimum Closed Side Settings (CSS): 40mm (1 1/2”) Demolition

and Recycling applications. 50mm (1 31/32”) quarry application

Reverse action for clearing blockages

Full hydraulic closed side setting adjust

UNDERCARRIAGE

Shoe Width: 400mm (16”)

Dual speed tracking

MAGNET

Belt Width: 750mm (30”)

Drive: Hydraulic

MAIN CONVEYOR

Belt Width: 900mm (36”)

Working Angle: 25°

Discharge Height: 3.5m (11’ 5”)

Impact bars and wear resistant liners at feed point

Standard Stockpile capacity: 60m³ (78yd³) @40°